home *** CD-ROM | disk | FTP | other *** search
- Path: pulsar.adcom.uci.edu!mpsevill
- From: mpsevill@pulsar.adcom.uci.edu (Modesto Sevilla)
- Newsgroups: comp.sys.amiga.hardware
- Subject: Re: 2 High Density Drives on A3000
- Date: 8 Feb 1996 23:19:01 GMT
- Organization: University of California, Irvine
- Message-ID: <4fe0d5$ej8@news.service.uci.edu>
- References: <4dn635$nsu@bud.shadow.net> <272.6555T803T2406@liberty.com>
- NNTP-Posting-Host: pulsar.adcom.uci.edu
-
- In article <272.6555T803T2406@liberty.com>,
- Tom Meudt <tmeudt@liberty.com> wrote:
- >
- >>I heard there was a patch to allow the use of 2 high density drives on
- >>the A3000. Is this true? And if yes, where can I find it?
- >
- >>Thanks
- >
- >>Brian
- >
- > Patch? what PATCH????????????????????? set'ure jumpers for hd's 1.76
- > that's all I had to do
- >
- >tmeudt@liberty.com
- >
-
- Jumpers? what JUMPERS??????????????? I bought a used A3000 with 2 drives
- and WB 2.0. After I upgraded to WB 3.1 I found out that the drives
- were actually high density. I did not set any jumpers unless the jumpers
- had already been set. If I had only known that the drives were already
- High Density I would have not bought an extra high density drive, which
- I had planned to put in instead of one of the old drives. So guess what
- I did with the extra drive... I put it in my A500 with WB 3.1, and it worked.
- I had to cut a little bit of the A500 case so that the eject button would
- fit, but otherwise it was a perfect fit internally. Bye.
-
- --
- |--- Modesto Sevilla (mpsevill@pulsar.adcom.uci.edu) ---|
- |-- Amiga 3000 and 500 owner --|
- |--- University of California, Irvine ---|
-
-